ClaudeBot, iteration v9 (November 12, 2026)
https://cdfam.com/case-studies/claudebot/

A five-servo desktop robot arm built to test Claude as a design agent.
Six printed parts, 3MF, millimetres. Material used: PETG. Printer used: Bambu Lab H2S.

  Base_261112_v9e.3mf          base, holds the yaw servo
  Turntable_261112_v5.3mf      turntable, holds the shoulder servo
  Upper_arm_261112_v9f.3mf     upper arm, 200 mm between joints
  Forearm_261112_v9f.3mf       forearm, 200 mm between joints
  Gripper_body_261112_v9f.3mf  gripper body, holds the jaw servo
  Jaw_261112_v9f.3mf           moving jaw

Servos: 5 x Feetech STS3215 (12 V, 30 kg.cm).
Print settings used: 4 walls, 30% gyroid infill, tree supports.
Each file carries its own description, load cases and optimizer settings in the 3MF metadata.

Status: this iteration had not been printed or tested when these files were published.
Earlier iterations were printed and assembled. Use at your own risk.

License: Creative Commons Attribution 4.0 International (CC BY 4.0)
https://creativecommons.org/licenses/by/4.0/
You may copy, modify and redistribute, including commercially, with attribution:
"ClaudeBot by CDFAM, cdfam.com/case-studies/claudebot, CC BY 4.0"
Provided as is, with no warranty.
